Amigurumi Valentine’s Dog Free Crochet Pattern

Valentine’s day is approaching and we continue to share amigurumi free patterns for you. You can visit our website for new patterns.

Pattern: (@emusatskova_toys)

 Necessary materials

1. Alize Cotton Gold hobby (about half a hank) color No. 382 – for the body

2. Alize Cotton Gold Hobby No. 56 – for a scarf (red)

3. YarnArt Baby for spout No. 338 (brown) quite a bit

4. A little blue, black and white yarn for the eyes (I used the Alize Cotton Gold hobby, dividing the thread into two equal parts)

5. Hook number 1.6

6. Filler

7. Dry pastel for tinting

Legend

Ch – air loop

Sc – single crochet

İnc – increase

Dec – decrease

SL-ST – connecting column

İnc hdc – half crochet increase

Torso

1 row: 12 sc into magic ring (tighten along the joint) (If you use cotter pins with disks instead of a plastic joint, then your 1st row will be split into two

rows: 1 – 6 sc into magic ring (6), 2 – 6 inc (12), then we knit as described)

2 row: (1 sc, 1 inc) * 6 (18)

3 row: (2 sc, 1 inc) * 6 (24)

4 row: 24 sc (24)

5 row: (the marker runs in the middle of the back) 5 sc, inc, 11 sc, inc, 6 sc (26)

6 row: 6 sc, inc, 12 sc, inc, 6 sc (28)

7 row: 28 sc (28)

8 row: 6 sc, inc, 14 sc, inc, 6 sc (30)

9 row: 7 sc, inc, 14 sc, inc, 7 sc (32)

10 row: 32 sc (32)

11 row: 7 sc, inc, 16 sc, inc, 7 sc (34)

12 row: 8 sc, inc, 16 sc, inc, 8 sc (36)

13 row: 36 sc (36)

14 row: 8 sc, inc, 18 sc, inc, 8 sc (38)

15 row: 9 sc, inc, 18 sc, inc, 9 sc (40)

16 row: 9 sc, inc, 20 sc, inc, 9 sc (42)

17 row: 10sc, inc, 20 sc, inc, 10 sc (44)

18 row: 44 sc (44)

19 row: inc, 3 sc, inc, (6sc, inc) * 5, 3 sc, inc (form the ass and tummy) (52)

20 – 25 rows: (6 rows) 52 sc (52)

26 row: dec, 3 sc, dec, (6 sc, dec) * 5, 3 sc, dec (44)

27 row: 44 sc (44)

28 row: 10 sc, dec, 20 sc, dec, 10 sc (42)

29 – 30 row: 42 sc (42)

31 row: 4 sc, put the marker, then 14 sc, go to the other side in the loop where the marker was placed (we get a ring of 15 sc).

• 

We knit the right leg:

1-5 rows: 15 sc (15)

6 row: 9 sc, inc, 2 sc, inc, 2 sc (17)

7 row: 3 sc, inc, 5 sc, 5 inc, 3 sc (23) Make sure that the increase is in front of the foot.

Move the knit if necessary.

8-9 rows: 23 sc (23)

10 row: (1 dec 1 sc) * 8 (15)

11 row: dec * 8 Tighten the hole.

Left leg:

Attach a thread by counting 15 sc in a semicircle

1 row: 15 sc, connect in a ring

2 – 6 rows: 15 sc (photo)

7 row: 2 sc, inc, 2 sc, inc, 9 sc (17)

8 row: sc, 5 inc, 5 sc, inc, 5 sc (23) The increase should be in front of the foot, if necessary, move the knitting.

9-10 rows: 23 sc (23)

11 row: (dec, sc) * 8 (15)

12 row: dec * 8. Tighten the hole.

Stuff the carcass, sew the hole between the legs.

Head

1 row: 6 sc into magic ring (6)

2 row: 6 inc (12)

3 row: 3 VP, 2 sc passes, with the 3rd column (sc, inc) * 5 (18)

4th row: 4 sc under the arch of 3 ch, (2 sc, inc) * 5 (24)

5 row: (3 sc, inc) * 6 (30)

6 row: (4 sc, inc) * 6 (36)

7 row: (5 sc, inc) * 6 (42)

8 row: (6 sc, inc) * 6 (48)

9 row – 13 row: 48 sc (48)

We align the marker in the middle of the nape, focusing on the hole for the joint.

14 row: 12 sc, dec, 5sc, dec, 6 sc, dec, 5 sc, dec, 12 sc (44)

15 row: 44 sc (44)

16 row: 10 sc, dec, 5 sc, dec, 6 sc, dec, 5 sc, dec, 10 sc (40)

17 row: dec, 8 sc, dec, 4 sc, dec, 5 sc, dec, 4 sc, dec, 8 sc, dec (34)

18 – 21 row: 34 sc (34) Attach the head to the body. We fill in the course of knitting.

22 row: (3 sc, dec) * 6, 4 sc (28)

23 row: 26 sc, dec (27)

24 row: (sc, dec) * 9 (18)

25 row: dec * 9 (9)

26 row: (dec, sc) * 3 (6)

Tighten the hole.

Ears:

1 row: 7 ch starting from the second loop from the hook 5 sc, 3 sc in one loop, 5 sc, turn

2 row: 3 sl-st, sc, 4 inc, sc, 3 sl-st on the bottom of the eyelet, 1 ch, 3 sc. Fasten the thread, cut, leaving a long tip for sewing.

The second ear fits in the same way.

• 

• 

• 

• 

Spout:

1 row: 4 ch, from the second loop from the hook 2 sc, 3sc in one loop, sc, inc

2 row: inc, 2sc, 2 inc, 2 sc, inc

3 row: inc, 4 sc, 2 inc, 4 sc, inc

4 row: 2 inc, sc, dec, sc, 4 inc, 4 sc, 2 inc (23)

5 row: 23 sc. Fasten, cut the thread, leave a long tip for sewing.

Sew to the head when a small hole remains – fill, hole

to stitch.

Eyes:

Start black

1 row: 5 sc into magic ring, change the thread to blue

2 row: 5 inc, change the thread to white

3 row: sc, inc, sc, turn

4th row: skip the first loop, from the second 2 sc, SL-ST to the last loop, SL-ST to the nearest loop of the 2nd row (blue).

We fix the thread, leave the long tip, go to the opposite side, (for this I’m not cutting the working thread, I just lay it along the wrong side) we attach to the first loop of the last row, SL-ST to the first loop of the 3rd row (white), SL- ST to the nearest loop of the 2nd row (blue). Fasten the thread, leave for sewing. We knit the second eye in the same way. Before sewing on eyes, I tint the area of ​​one eye.

Sew eyes as in the photo, embroider the upper eyelid (primary color), eyebrows and a smile (brown).

Pens:

1 row: 6 sc into magic ring

2 row: 6 inc (12)

3 row – 20 row (18 rows): 12 sc (12)

21 row: dec * 6. Tighten the hole.

The second handle fits in the same way. We attach the handles to the body with a thread mount.

Tail:

1 row: 6 sc into magic ring

2 row: 6 sc (6)

3 row: (2 sc, inc) * 2 (8)

4 row: sc

5 row: (3 sc, inc) * 2 (10)

6 row – 7 row: 10 sc (10)

Sew to the body.

After the toy is fully assembled, we tint the inside of the ear, one side and the ass on one side of the tail.

Heart:

1 row: 6 sc into magic ring

2 row: 2 inc, (sc, dc, sc) in one loop, 2 inc, sl-st

3 row: sc, inc hdc, hdc, inc, sc, (sc, hdc, sc) in one loop, sc, inc, hdc, inc hdc, sc, sl-st. Fasten the thread, cut.

Sew a heart to a doggie.

Thank you for knitting with me!