Amigurumi Doll Brownie Hariton Free Crochet Pattern

Pinterest Offical Page : amigurumipatterns.pic2re.com

Facebook Group: amigurumipatterns.pic2re.com

Facebook Offical Page: amigurumipatterns.pic2re.com

 The height of the house is 33 cm.

Foot length – 10 cm.

Khariton is knitted in one solid figure, only the eyelids, nose and ears are sewn.

Hat, shirt, vest – removable parts, knit separately.

The blast furnace is completely, as well as all its removable parts, crocheted 1.6 mm, regardless of the thickness of the yarn!

Legend:

SC – single crochet;

HDC – half crochet;

CH – air loop;

SL-ST – connecting column;

Dec – decrease;

İnc – increase;

LCH – Lifting Loop Chain

Necessary materials:

1. Alize Diva yarn: – Beige (for body); – White (for socks and bags); – Blue (for pants). 2. Yarn Yarn Art Tulip: – Red (for shirt). 3. Yarn sock wool blend: – beige (for bast shoes); – brown (for hat and vest).

4. Felting wool white (for styling hair, beard and eyebrows).

5. Needle for felting.

6. Screw eyes with plugs, blue – 2 pcs.

7. Wooden beads (for decorating hats, bast shoes, bags and belts).

8. Large blue beads (for decorating hats and belts).

9. Foamiran butterflies (for decorating hats and brooms).

10. Sewed symbols “Horseshoe”, “Hand” (for decorating hats and vests).

11. Hook 1.6 mm.

12. Scissors, sewing needle, pliers.

13. Cardboard is tight (for the soles of bast shoes).

14. Clay Moment.

15. Filler (holofiber, synthetic winterizer).

16. Copper wire is thick and thin (for arms, neck, broom).

17. Artificial blue flowers – 3 pcs. (to decorate the vest).

18. Bast (for a broom).

19. Decorative button-butterfly (for bag).

 Getting to work!

  Eyelids (4pcs)

We dial 11 CH, we turn work, 10 SC.

We knit 4 such segments.

 Nose

6 SC at MAGİC RİNG;

6 inc;

12 SC × 2 times.

Leave a long thread for sewing on the nose.

 Ears (2pcs)

6 SC at MAGİC RİNG;

We turn the work and do 6 inc.

Leave a long thread for sewing.

 Hands.

 First we knit the fingers.

Big:

 8 SC in MAGİC RİNG

8 SC × 4 rows.

Index, middle, nameless and pinky fit the same way –

 6 SC at MAGİC RİNG

6 SC × 5 rows.

 On the little finger we do not cut the thread, but continue knitting:

3 SC on the little finger, 3 SC on the nameless, 3 SC on the middle and 6 SC on the index. Then 3 SC on average, 3 SC on nameless and 3 SC on little finger (24);

24 SC;

 8 SC, 4 SC simultaneously on the thumb and palm, 12 SC (for the right hand). For the left, it fits the other way round – 12 SC, 4 SC simultaneously on the thumb and palm, 8 SC (24);

8 SC, 4 SC on the thumb, 12 SC (for the right hand), for the left – 12 SC, 4 SC on the thumb, 8 SC (24);

24 SC;

(2 SC, dec) × 6 times (18);

18 SC;

(2 SC, dec) × 4 times, 2 SC (14);

Fill the palm with filler.

 14 SC × 25 rows.

 We knit the left hand in the same way, given the changes in joining the thumb!

 Legs.

We collect a chain of 18 CH, in the 2nd loop from the hook we knit 2 SC (inc), then we knit 15 SC, 5 SC in the last CH. Next, we knit in a circle on the opposite side of the chain 15 SC, 2 SC in the last loop (39). This was the first lap.

2nd circle: 2 inc, 15 SC, 5inc, 15 SC, 2 inc (48)

3rd circle 🙁 inc, 1 SC) × 2 times, 15 SC, (inc, 1 SC) × 5 times, 15 SC, (inc, 1 SC) × 2 times (57)

4th circle: (inc, 2 SC) × 2 times, 15 SC, (inc, 2 SC) × 5 times, 15 SC, (inc, 2 SC) × 2 times (66)

5th circle: (inc, 3 SC) × 2 times, 15 SC, (inc, 3 SC) × 5 times, 15 SC, (inc, 3 SC) × 2 times (75)

Thus we formed the sole of the bast.

 We cut the insole from the cardboard according to the size of the resulting sole and glue it on the wrong side of the knitting.

 Next, set the marker (I use a small length of thread of a different color) and continue to knit exactly 5 rows in a circle of 75 SC. We fix the thread and cut it.

Now we will engage in the formation of the front of the bast.

We find the center (middle) in the front of the bast shoe and select exactly 12 loops in this part.

We attach the thread and knit İN ROWS.

12 SC × 6 rows.

 The result was a “tongue”.

 We attach the sides of the “tongue” to the sides of the bast shoes and sew them together.

 Our bast shoes are ready!

Next, continue knitting with a white thread. It will be a brownie sock.

We attach the thread to the rear half-loops of the “tongue”, we leave the front ones for decorative binding of the bast shoes. We have exactly 12 loops there, but since the AlizeDiva thread is slightly thinner than the sock yarn, at the very beginning of knitting the sock, we need to make several increases. I am doing 4 increases.

We attach the thread and knit: inc, 3 SC, inc, 3 SC, inc, 2 SC, inc.

A total of 16 loops.

Next, we will knit İN ROWS, just as we knit the tongue of bast shoes.

16 SC × 10 rows.

Now, we apply the side of the sock with the working thread to the side of the bast.

We count 8 loops on the side of the bast shoe from its front part, and from the 9th loop, for the back half loops, we knit in a circle.

 On the other hand, we also apply our white segment, leave 8 loops not knitted and finish knitting with 16 loops on the side of the sock.

So we got a vicious circle of 48 SC.

Formed from loose knit loops of prop If we sew a tone-on-tone thread on the back half-loops of the bast shoes, as shown in the photo, we leave the front ones for decorative trim!

Tightly stuff the bast shoe, trying to evenly distribute the filler.

We do the binding of the bast shoes in a circle, for the half loops left by the usual SL-ST.

 We continue to knit a sock.

We make evenly 10 decreases.

(Dec, 3 SC) × 9 times, dec, 1 SC (38)

38 SC × 15 rows.

We tie to the middle of the back of the leg and attach the blue thread.

 We do not cut the white thread yet.

For the back half loops we knit the first row of pants.

İnc, 37 SC (39)

Next, we knit for both half loops.

1 SC, inc, 37 SC (40)

2 SC, inc, 37 SC (41)

3 SC, inc, 37 SC (42)

4 SC, inc, 37 SC (43)

4 SC, 2inc, 37 SC (45)

45 SC × 15 rows.

We fix the thread, cut it off.

 We return to the white thread.

For the left front half-loops we will knit a sock harness.

I tie with the usual SL-ST.

38 SL-ST.

And so the left leg of the brownie is ready.

 We knit the right leg in the same way, but at the end of knitting we do not cut the thread.

 We make laces for bast shoes from the same beige wool mixture.

We cut two long identical lengths of thread, about 25-30 cm long.

We decorate both ends of each thread with wooden beads and fix them with knots.

Then we fix the center of each thread to the center of the back of the bast shoe, wrap it several turns around the leg (along the white toe) and tie it to 2 knots.

 We put both legs in front of us.

 Find the middle on the inside of both legs and mark them. Here we will have a connection legs.

If there are not enough loops to the middle you have planned, then tie them, and vice versa, if you need to dissolve a few, then loosen them.

So, we begin joining the legs.

From the right leg we knit 3 CH, then 45 SC along the left leg, 3 inc we do on one side of the chain of 3 CH, then we knit 45 SC along the right leg and also 3 inc on the second side of the chain of 3 CH (102 )

Knit in a circle 102 SC × 5 rows

(8 SC, dec) × 10 times, 2 SC (92)

(7 SC, dec) × 10 times, 2 SC (82)

(6 SC, dec) × 10 times, 2 SC (72)

72 SC × 5 rows.

 Tightly stuff the legs with filler.

We attach the beige thread and we knit 72 SC for the back wall.

Go back to the blue. Behind the front wall we make panties strapping. We knit 72 SL-ST. We fix and thread the blue thread.

 Beige thread continues to knit the body.

72 SC × 19 rows.

We fill the body with filler.

Next, we will tie our hands.

 16 SC, 4 SC simultaneously on the left hand and body, 30 SC, 4 SC simultaneously on the right hand and body, 18 SC (72);

16 SC, 10 SC on the left hand, 30 SC, 10 SC on the right hand, 18 SC (84);

84 SC × 3 rows;

At this point, you must insert the thick copper wire into the hands of the brownie.

To do this, we spread both hands of the brownie in different directions and measure their total length.

Cut the wire of the desired length and insert into both hands. One end in one hand, the other in the other, and evenly distribute.

If necessary, add filler and continue knitting:

(5 SC, dec) × 12 times (72);

(4 SC, dec) × 12 times (60);

(4 SC, dec) × 10 times (50);

(3 SC, dec) × 10 times (40);

(3 SC, dec) × 8 times (32);

(2 SC, dec) × 8 times (24);

24 SC × 7 rows (neck).

We will continue to knit the house-head after we tie and put on a shirt!

 Shirt.

We dial 42 CH (2 runways)

 We turn the work. With the 3rd from the hook of the loop we knit 40 HDC, 1 LCH, turn the work;

(2 SC, inc) × 13 times, 1 SC, 1 LCH, turn (53);

(3 SC, inc) × 13 times, 1 SC, 1 LCH, turn (66);

11 SC, 11 CH, 11 SC skip, 22 SC, 11 CH, 11 SC skip, 11 SC, 1 LCH, turn (66);

 66 SC × 3 İN ROWS.

 Next, knit in a circle HDC.

66 HDC × 13 rows;

 (2 HDC, inc) × 22 times (88);

(3 HDC, inc) × 22 times (110);

110 HDC × 4 rows;

Crawling step.

Next, we knit the sleeves. We attach the thread to the center of the inner side of the sleeve and dial 24 HDC in a circle;

24 HDC × 15 rows;

Crawling step.

With a gait, we also tie the neck and neckline of the front of the shirt.

We make a small piece of white thread lacing on the chest of the brownie.

Our shirt is ready!

Dress her up and knit her head to Hariton.

(3 SC, inc) × 6 times (30);

(4 SC, inc) × 6 times (36);

(5 SC, inc) × 6 times (42);

(6SC, inc) × 6 times (48);

(7SC, inc) × 6 times (54);

(8 SC, inc) × 6 times (60);

(9 SC, inc) × 6 times (66);

(10 SC, inc) × 6 times (72);

(11 SC, inc) × 6 times (78);

(12 SC, inc) × 6 times (84);

(13 SC, inc) × 6 times (90);

(14 SC, inc) × 6 times (96);

(15 SC, inc) × 6 times (102);

102 SC × 10 rows;

38SC, 3 CH, 3 SC skip, 10 SC, 3 CH, 3 SC skip, 48 SC (102);

 102 SC × 10 rows.

We insert eyes. Sew eyelids, nose (add a little filler to the nose), ears. In the neck for stability, insert the wire and add filler.

Gradually fill our heads.

We continue knitting:

(15 SC, dec) × 6 times;

(14 SC, dec) × 6 times;

(13 SC, dec) × 6 times;

(12 SC, dec) × 6 times;

(11 SC, dec) × 6 times;

(10SC, dec) × 6 times;

(9 SC, dec) × 6 times;

(8 SC, dec) × 6 times;

(7 SC, dec) × 6 times;

(6 SC, dec) × 6 times;

(5 SC, dec) × 6 times;

(4 SC, dec) × 6 times;

(3 SC, dec) × 6 times;

(2 SC, dec) × 6 times;

(1 SC, dec) × 6 times;

6 dec.

We fix the thread, cut it and hide it.

 Now we’ll take care of hair, beard and eyebrow styling based on photos.

Hat.

 6 SC at MAGİC RİNG;

6 inc (12);

(1 SC, inc) × 6 times (18);

(2 SC, inc) × 6 times (24);

(3 SC, inc) × 6 times (30);

(4 SC, inc) × 6 times (36);

(5 SC, inc) × 6 times (42);

(6 SC, inc) × 6 times (48);

(7 SC, inc) × 6 times (54);

(8 SC, inc) × 6 times (60);

(9 SC, inc) × 6 times (66);

For the rear half loops we knit 66 SC;

66 SC × 4 rows;

(10 SC, inc) × 6 times (72);

(11 SC, inc) × 6 times (78);

(12 SC, inc) × 6 times (84);

(13 SC, inc) × 6 times (90);

(14 SC, inc) × 6 times (96);

Crawling step.

The hat is ready and you can do its decoration!

We sew foamiran butterflies, wooden beads, beads and a horseshoe (see photo). Sew all the details with the same thread that knitted the hat!

Vest.

Our vest will be knitted İN ROWS, so at the beginning of each row you will need to make lifting loops (LCH), 2 LCH if the row fits HDC, and 1 LCH if we knit SC!

We dial 26 CH (2 runways);

With the 3rd from the hook, we knit 24 HDC;

(3 HDC, inc) × 5 times, 4 HDC (29);

(4 HDC, inc) × 5 times, 4 HDC (34);

(5 HDC, inc) × 5 times, 4 HDC (39);

13CH, 12-loop skip, 13 SC, 13 CH, 12-loop skip, 1 SC (39);

39 HDC;

39 SC;

39 HDC;

39 SC;

39 HDC;

39 SC;

39 HDC;

39 SC;

39 HDC.

We fix the thread, cut it off.

We attach the thread to the beginning of the left shelf, make 2 LCH, and begin to tie the HDC vest. We tie the left shelf, the bottom of the back, go up the right shelf.

Do not tie neckline!

We tied the loops of the right shelf, turn the knitting, do 2 LCH, and continue tying in the opposite direction. We tie the loops of the left shelf, once again we turn the work, we do 2 LCH, and once again we knit the HDC to the end of the right shelf.

Thus, we made 3 semicircles of the İN ROWS strapping, thereby lengthening the vest a little more and forming it in front (shelves, left and right).

We fix the thread, cut it and hide it.

Our vest is ready!

We pin flowers to the right shelf of the vest and a little lower we sew the amulet “Hand”.

Belt.

Using beige wool mixture, we draw a chain of 55 CH.

Leave a long tail at the very beginning of the loop set. On this thread we will string beads and beads!

Scored a chain, also leave a long tail, cut the thread.

We attach the brown wool mixture (also do not forget to leave long threads on both sides) and knit 55 SC. We cut the thread.

We attach the white thread and knit 55 SC (do not forget to leave long tails on both sides).

The belt is ready!

On the left ponytails we string wooden beads and beads. We make thick knots at the ends of the threads so that the beads do not fall off.

A bag.

Our bag will be knitted İN ROWS, so at the beginning of each row we make 1 LCH!

We collect a chain of 16 CH (1 LCH).

15 SC × 10 rows;

15 SC we knit for the back walls;

15 SC we knit for the front walls;

15 SC × 10 rows.

The resulting rectangle is bent in half (the place where we knitted for the front and rear walls should be inside).

Beige wool blend the sides of the SC bag, as shown in the photo.

 Turn out the bag.

Sew on the butterfly button.

Using beige wool mixture, we collect a chain of 60 CH.

The bag belt turned out.

Long threads should remain on both sides of the chain, for which you must carefully attach the belt to the bag.

We do not cut the threads, string on each of them 1 wooden bead and fix them with knots.

Then we cut off 7 small pieces of beige half-wool and tie them evenly to the bottom of the bag on the front side (where there were no knitted half loops).

Our bag is ready!

 Broom.

 The bast is a kind of artificial straw.

Choose the required number of “straws” of the same length.

Our broom will turn out to be 15 cm high, so the length of each “straw” should be about 30 cm.

The more you collect, the better. It should get a good bunch.

We bend it in half and wrap it with thin wire just above the middle. Pin the foamiran butterfly on the wire, fix the end of the wire well and hide it.

The broom is ready!

 Here we have such a wonderful Hariton!

 For each of you, he will certainly bring good luck and prosperity, because things made by yourself are endowed with magic!

Leave a Comment

E-posta hesabınız yayımlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir