Amigurumi Peach Cat Free Crochet Pattern

Pinterest Offical Page : amigurumipatterns.pic2re.com

Facebook Group: amigurumipatterns.pic2re.com

Facebook Offical Page: amigurumipatterns.pic2re.com

Peach Cat

Legend:

ch – air loop;

sc – single crochet;

inc – increase (knit two sc in one loop);

dec – decrease (for the front walls);

sl-st – connecting post;

(1 sc, inc) x6 times – knit the action in brackets 6 times in a row;

(21) – at the end of the line, the number in brackets indicates the number of loops.

Necessary materials:

1 skein of Himalaya Dolphin Baby (120m – 100g) or 1.5 skeins of Yarn Art Dolche

the scheme is designed for hook number 4;

filler (holofiber);

eyes 14/16/18 mm (I have shiny trapeziums of 14 mm);

spout 12×15 mm (I have a velvet peach);

long needle for sewing (about 12 cm);

a needle with a wide eye for tightening the hole of parts;

thread for fastening parts: nylon, dental floss;

pins tailors with a ball at the end;

stocking needles 2-3 pcs.

The appearance and size of the toy depends on the knitting density and the way the thread is caught. Exactly 1 skein left me, I knit tightly with check marks. For the first time, I recommend taking the yarn with a margin.

Hands (2 parts)

1.6 sc into second loop.

2.inc x6 (12).

3.4 sc, 4 inc, 4 sc (16).

4.6 sc, 2 dec, 6 sc (14).

5. 5 sc, 2 dec, 5 sc (12).

6.5 sc, dec, 5 sc (11). We fill only the bottom of the foot.

7-13. 11 sc – 7 rows. Work 4 more sc.

No more stuffing, knit two sides together – 5 sc.

We fix the thread, hide it.

Tail

We fix the thread, hide it.

1.6 sc into second loop.

2. (1 sc, inc) х3 (9).

3-13. 9 sc – 11 rows.

We do not fill. Fold, knit on both sides – 4 sc.

Legs (2 parts)

1.7 sc into second loop.

2.inc x7 (14).

3. (1 sc, inc) x7 (21).

4. (6 sc, inc) х3 (24).

5.24 sc.

6. (4 sc, dec) x4 (20).

7. (2 sc, dec) x5 (15).

8-11. 15 sc – 4 rows.

Connecting post. Cut the thread.

We knit the second leg in the same way, do not cut the thread.

Body

We have the first leg where the thread is cut and the second where the thread was left.

We knit along the second 3 sc – put a marker (end of the row).

0-1. Chain of 4 ch, then attach the first leg: knit 15 sc along it. Further along the first side of the chain: sl-st, 2 inc, sl-st; again 15 sc on the second leg – we reached the marker. On the second side of the chain: sl-st, 2 inc, sl-st and knit the remaining sc to the end of the row (to the marker) (42).

2.14 sc, inc, 18 sc, inc, 8 sc (44).

3. We knit the tail. Make sure that it is in the middle above the chain: 1 sc, 4 together along the tail and body, 14 sc, inc, 7 sc, inc, 13 sc (46).

4-7. 46 sc – 4 rows. We fill the bottom of the toy, the legs are tight.

8. (6 sc, dec) x6 (40).

9.40 sc.

10. (6 sc, dec) x5 (35).

11.35 sc.

12. (5 sc, dec) x5 (30). We fill the belly not very tightly.

13. (4 sc, dec) x5 (25).

14. (3 sc, dec) x5 (20).

15. Knit handles: 5 sc, 5 sc together, 6 sc, 5 sc together (20).

It so happened that we stepped over the marker by one loop.

Move the marker forward.

16. (2 sc, dec) x5 (15).

17. (1 sc, dec) x5 (10).

We stuff the neck. Try to pull the toy upwards while stuffing, and not wide.

Head

1.7 sc into second loop.

2.inc x7 (14).

3. (1 sc, inc) x7 (21).

4. (2 sc, inc) x7 (28).

5. (3 sc, inc) x7 (35).

6. (4 sc, inc) x7 (42).

7. (5 sc, inc) x7 (49).

8.49 sc.

9.49 sc. This row will have a nose: a marker around 27 sc. For convenient installation of the accessories on a secure mount, we will knit a few more rows.

10-13. 49 sc – 4 rows.

We put it facing us. Place the nose in row 9 between 27-28 sc.

We go up 2 rows – this is row 11: put the eyes at a distance of 8 sc from each other.

14. (5 sc, dec) x7 (42).

15.42 sc. We begin to fill in the detail: the cheeks are denser, but the head should remain soft.

16. (4 sc, dec) x7 (35).

17. (3 sc, dec) x7 (28).

18. (2 sc, dec) x7 (21).

19. (1 sc, dec) x7 (14).

20.dec x7 (7) – pull off. We fill it to the end.

Ears (2 parts)

1.7 sc in the ring. Do not tighten strongly so that there is a triangle.

2. Rotate knitting. 3 sc, 3 sc in 1 (top), 3 sc.

3. Ch, flip knit, inc, 4 sc, 3 sc at 1, 3 sc, inc.

4. Tie the bottom, 7 sc (so that there is no big hole from the ring, grab a couple of posts from the bottom.

Face tightening

Cut off the thread about 50 cm.If you take a dental thread, then fold it 2 times, nylon – 3 times, if Yarn Art Jeans, then 1 thread. If the thread is pulled too tight, the thread may break. I do everything with one thread, you can take several cuts.

We take the head, put the thumbs on the 2nd row of 7 increments closer to the back, and put the index fingers on the eyes – squeeze – if you like the cheeks, we can fix them with threads, Change the position of the hands until you find the position that you like.

Face tightening

Eyes.

We enter 1 in the row of increments (where we pressed it with our thumbs), we leave the tail of the thread about 15 cm – we bring out 2 on the side under the first eye – we enter 3 under the eye on the other side (after 3 sc) – we bring it back to 1. Press with our finger and slowly pull it thread, fasten with two knots.

Cheeks.

We insert the needle as much as possible under the tip of the nose 6 – bring it to 1, tighten it. We repeat once more.

We repeat everything again with the right eye (points 4 and 5), only wider (not after 3 sc, but after 5 sc). Pressed with a finger – pulled up the thread – tied the knots. If the length allows, you can continue the same thread.

Nose. We put in 1 – we put out 2 immediately above the nose on the right side – we put the 3 needle to the left above the nose on the other side (after 3 sc) – we bring it back to 1. Press down the nose, pull the thread, knit.

We look, if you want the eyes deeper – we make additional parallel tightenings on the sides of the eyes. For example, in the right eye: output 4 on one side under the eye – input 5 on the same side above the eye – output to 1, tighten with knots. On the other hand, the same way: we enter 6 at the bottom – we enter 7 at the top – we bring it into 1, tighten it with knots.

We embroider the antennae, I have half the thread of YarnArt Jeans, because everything is too thick. Add sidebars as desired.

Sew on the head

Cut off the thread about 50 cm. If you take a dental thread, then fold it 2 times, nylon – 3 times, if Yarn Jeans, then 1 thread.

Thanks to the tightening of the muzzle, there is a depression under the head, as if we insert the neck there. Adjust the tilt of your head yourself.

We pass the head and body with knitting needles, so it will not slip out during sewing.

I start to sew under my nose. Sew on for a full column between the 16th row.

When half of the back has been sewn, we take out the knitting needles, relax the head, sew. We fix the thread.

Sew on the ears.

Leave a Comment

E-posta hesabınız yayımlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir