Amigurumi Candy Doll Free Pattern

Pinterest Offical Page : amigurumipatterns.pic2re.com

Facebook Group: amigurumipatterns.pic2re.com

Facebook Offical Page: amigurumipatterns.pic2re.com

You can browse our website for amigurumi cady doll pattern and many free patterns.

You will need:

– flesh-colored yarn,

– yarn (small skeins) for hair and clothes,

– hook,

– filler for toys (holofiber),

– stitching needle,

– plastic eyes for dolls,

– beads or other decorative items.

Abbreviations used in the description:

CH – air loop

SC – single crochet

HDC – half double crochet

DC – double crochet

ss4n – a column with four crochets

SL-ST – connecting post

İNC – from one loop – we knit two columns

DEC – knit two stitches together (with a common top)

Head:

We knit with flesh-colored yarn.

1st row: 6 SC in amigurumi ring

2nd row: 6 İNC (12)

3rd row: (SC, İNC) 6 times (18)

4th row: (2 SC, İNC) 6 times (24)

5 row: (3 SC, İNC) 6 times (30)

6 row: (4 SC, İNC) 6 times (36)

7 row: (5 SC, İNC) 6 times (42)

8 row: (6 SC, İNC) 6 times (48)

9 row: (7 SC, İNC) 6 times (54)

10 row: (8 SC, İNC) 6 times (60)

11-23 row: 60 SC

24 row: (8 SC, DEC) 6 times (54)

25 row: (7 SC, DEC) 6 times (48)

26 row: (6 SC, DEC) 6 times (42)

27 row: (5 SC, DEC) 6 times (36)

Row 28: (4 SC, DEC) 6 times (30)

Row 29: (3 SC, DEC) 6 times (24)

30 row: (2 SC, DEC) 6 times (18)

Row 31: (1 SC, DEC) 6 times (12)

After the head is tied, we fill it and make a tightening in the eye area.

The tightening can be done with a thin flesh-colored thread. Insert the needle from below into the unsewn opening of the head and bring it out in the center (approximately between 16-17 near the crown), then through the row we bring the needle back into the head, tighten and tie a knot, a “dimple” has formed. Bring the needle out in the place of the second eye (after about 9 loops) and through a row again tightened inward, tied a knot. Cut off the excess thread, hide the ends of the threads inside the head in the padding.

Pull the hole in the head and remove the tail of the thread.

Body:

Since we will have a doll in a sarafan and a blouse, we begin to knit the body in the color that we chose for the blouse.

1st row: 6 SC in amigurumi ring

2nd row: 6 İNC (12)

3rd row: (SC, İNC) 6 times (18)

4-5 row: 18 SC

6 row: (2 SC, İNC) 6 times (24)

7 row: 24 SC

8 row: (3 SC, İNC) 6 times (30)

9 row: 30 SC

10 row: (4 SC, İNC) 6 times (36)

11 row: 36 SC 12 row: (5 SC, İNC) 6 times (42)

13-14 row: 42 SC 15 row: (6 SC, İNC) 6 times (48)

16 row: 48 SC 17 row: (7 SC, İNC) 6 times (54)

18th row: 54 SC

We change the color of the thread, we take the color with which the pantaloons will be knitted.

Row 19: 54 SC

20 row: (8 SC, İNC) 6 times (60)

Row 21: 60 SC

22 row: (4 SC, DEC) 10 times (50)

23 row: (3 SC, DEC) 10 times (40)

24 row: (2 SC, DEC) 10 times (30)

25 row: (4 SC, DEC) 5 times (24)

26 row: (3 SC, DEC) 5 times (20)

27 row: (2 SC, DEC) 5 times (16)

28 row: decrease 8 times

We fill the body, tighten and hide the tail of the thread inside.

Arms:

Hands are knitted from the palm of the hand, knitting begins with flesh-colored yarn.

1st row: 6 SC in amigurumi ring

2nd row: 6 İNC (12)

3rd row: (SC, İNC) 6 times (18)

4 5 row: 18 SC

6 row: (7 SC, DEC) 2 times (16)

7 row: 16 SC

In the eighth row we knit a finger:

8 row: 6 SC, 4 DC with one vertex in the trail loop, 9 SC

9 row: (6 SC, DEC) 2 times (14)

10 row: 14 SC

11 row: (5 SC, DEC) 2 times (12)

Change the color of the thread to the color we chose for the blouse.

12 row: 12 SC

13 row: 12 SC behind the back wall of the loop

13 21 row: 12 SC, leave a long tail of thread so you can sew the handle and sew to

body.

Fill the handle with filler. The cam needs to be stuffed tightly enough, the handle itself can be made softer. Now fold the top of the handle flat and tie the edge.

It remains to knit the ruffle on the sleeve. In the place where they knitted for the back wall of the loop (row 13) on the handle, attach a thread (blouse color) and for the remaining free front walls of the loop, knit a ruff: 3 vp, 1 SC. Hide the tail of the thread inside the handle.

Tie the second handle to the doll in the same way.

Legs:

For the legs, you first need to tie the foot in the toe, and then the leg itself.

Foot:

1st row: 6 SC in amigurumi ring

2nd row: 6 İNC (12)

3rd row: (SC, İNC) 6 times (18)

4th row: (2 SC, İNC) 6 times (24)

5 row: (3 SC, İNC) 6 times (30)

6-11 row: 30 SC

12 row: (13 SC, DEC) 2 times (28)

13 row: 28 SC 14 row: (12 SC, DEC) 2 times (26)

15 row: 26 SC

16 row: (11 SC, DEC) 2 times (24)

17 row: 24 SC

Row 18: (10 SC, DEC) 2 times (22)

Row 19: 22 SC

20 row: (9 SC, DEC) 2 times (20),

Stuff your foot tightly.

Row 21: (DEC) 6 times, pull off the hole and hide the end of the thread.

Now around the foot in the place of narrowing, dial 15 loops in a circle (the color is the same color of the socks).

Knit the top of the toe:

1 6 row: 15 SC

Change the color of the thread to flesh and then knit the leg of the doll.

7 row: 15 SC behind the back wall of the loop

8 19 row: 15 SC

Change the thread color to the one chosen for the pantaloons.

20 row: 15 SC behind the back wall of the loop

21 row: (4 SC, İNC) 3 times (18)

22-25 row: 18 SC

Fold over the top of your leg and tie a flat edge (like your arms).

Make a ruff (3 VP, 1 SC) with the color of the socks in the 7th row (where knitted for the back wall). Also do the ruff in the 20th row in the color of the pantaloons.

Shoes:

Tie the sole according to the pattern.

Further:

5 row: 43 SC behind the back wall of the loop

6-9 row: 43 SC

10 row: 8 SC, 2 HDC, 8 decreases HDC, 2 HDC, 15 SC (35)

11 row: 8 SC, 12 H DC, 15 SC (35)

12th row: 8 SC, 2 HDC, 4 decreases HDC, 2 HDC, 9 SC, 3 decreases SC (28)

Put the shoe on the leg, attach the thread on the side. Next, knit 8 VP, join with a connecting post on the other side of the shoe, turn the knit and knit 8 HDC straps. Secure the thread and hide the ponytails. Tie the second shoe in the same way.

Nose:

Knit with flesh-colored yarn.

1st row: 6 SC in amigurumi ring

2nd row: 6 SC

Leave just enough tip for sewing and sew the nose over your face.

Ears:

Knit with flesh-colored yarn. At eye level, pull back 9 SC, attach. Further 3 CH lift, 8 DC.

Bring the tail of the thread 2 rows higher (lower) behind the eye, hook the tail of the thread that remained from the attachment of the thread at the beginning of knitting of the ear to the third ch. lifting and output in the same place as the final tail. Tie the ends into a knot and hide inside the head. repeat for the second ear.

Dress:

For a coquette dial 26 CH

1 row: 1 CH lift, 25 SC

2nd row: 6 CH lift, 5 cc4n, 2 CH, 10 cc4n, 2 CH, 6 cc4n

3rd row: 1 CH lift, 25 SC

Next, tie the skirt according to the pattern:

For hair, cut the threads to the required length (depending on the desired hair length). Then secure each thread in a circle around the crown of your head. Move in circular rows from the top of your head to the sides.

To fasten the hair thread, insert the hook towards the crown, hook the thread folded in half in the middle and pull. Then grab both ends of the thread and pull through the loop. Tighten.

Now it remains to “assemble” the doll. Put on a dress, sew your head to your body, also your arms and legs.

Sew hands between 4-5 near the body, and legs between 22-23. Braid the doll’s hair, decorate the dress, shoes with beads or other decorations.

Leave a Comment

E-posta hesabınız yayımlanmayacak. Gerekli alanlar * ile işaretlenmişlerdir