Amigurumi Little Bear Free Pattern

LITTLE BEAR

Necessary materials:

– yarn “Kuzya Klubochkin”, milky color (95 m / 50 g) – 1 skein;

– yarn Pekhorka “Openwork”, color 03 light beige (280 m / 50 g) – 1 skein;

– hook Clover No. 1.5 (choose according to the thickness of the yarn);

– filler (holofiber);

– two small beads for the eyes (you can use ready-made eyes);

– black or brown thread for the spout;

– bobbin thread in the color of the yarn, for sewing on the muzzle and ears;

– needle and thread for tightening;

– for fixing the head: 2 discs 15 mm, 1 T-pin 18 mm; for attaching the upper paws:

4 discs 12 mm, 2 T-pins 18 mm; for attaching the lower paws: 4 discs 15 mm, 2 T-pins 18 mm;

Note: The paw discs must be selected so that they fit snugly into the paw.

– manicure scissors for cutting;

– oil pastels for toning;

When using these materials, you get a bear with a height of 11-12 cm. The yarn consumption is small.

Legend:

ch – air loop;

sc – single crochet;

inc – increase;

dec – decrease.

Preparing for knitting

Yarn “Kuzya Klubochkin” consists of three twisted threads. We will knit the bear in one thread, so it is necessary to divide the hank into three, one thread each.

We connect the thread of the Kuzi Klubochkin yarn and the thread of the Openwork yarn and start knitting.

• 

• 

• 

Head

1 row. 6 sc in an amigurumi ring

2 row. 6 inc (12)

3 row. (1 sc, inc) × 6 times (18)

4 row. (2 sc, inc) × 6 times (24)

5 row. (3 sc, inc) × 6 times (30)

6 row. (4 sc, inc) × 6 times (36)

7-12 rows. 36 sc (6 rows)

13 row. (4 sc, dec) × 6 times (30)

14 row. (3 sc, dec) × 6 times (24)

15 row. (2 sc, dec) × 6 times (18)

16 row. (1 sc, dec) × 6 times (12)

We stuff our heads.

We take a 15 mm disc and a T-shaped cotter pin. We make the fastening – we insert the cotter pin into the disk.

We insert the cotter pin into the hole.

17 row. Dec 6

We tighten the hole. We cut the thread, fasten it and hide it inside the part.

We take manicure scissors and make a neat haircut of the head.

Muzzle

We knit a chain of 5 ch

1 row. from the second loop 3 sc, 3sc in 1 p, continue to knit on the other side 2 sc, inc (10)

2 row. inc, 2 sc, 3 inc, 2 sc, 2 inc (16)

3 row. 16 sc

The thread is cut and fastened.

We take manicure scissors and make a neat haircut of the muzzle.

• 

• 

• 

Ears (2 parts)

We knit in one thread “Kuzi Klubochkin”, without the thread “Openwork”.

1 row. 6 sc in an amigurumi ring

2 row. 6 inc (12)

3 row. 12 sc

4 row. Fold the two sides of the part and knit 6 sc, through the loops of both sides.

The thread is cut and fastened.

We take manicure scissors and make a neat haircut of the ears.

Assembly and design of the head

With the help of sewing pins, we mark the center of the head, places for the ears and fasten the muzzle. We sew the muzzle with bobbin threads. You can carefully outline the shape of the nose with a pencil.

We embroider a nose.

Next, we will make weights, but you can do without them.

We do eye tightening.

1. Insert the needle at the point of the left ear (starting point) and withdraw it at the point of the left eye.

2. Stepping back 1 loop down, insert the needle and bring it out next to the starting point of the ear.

3. We tighten the threads (not much!) And fasten.

4. We hide the ends of the thread inside the head.

Repeat procedure 1 – 4 with the right side.

Sew on the ears. Using a light brown oil pastel and a hard brush, we tint the head.

Let the tint dry.

Sew eyes (beads). We introduce a needle at the bottom of the head, in the neck area. We bring out the needle in the area of ​​​​the eye and plant the bead, return the needle to the starting point. We repeat this procedure with the second eye. Fasten the thread and hide inside the head.

• 

Upper paws

We knit a chain of 4 ch

1 row. from 2nd st inc, 1 sc, 3sc in 1 st, continue on other side 1 sc, inc (9)

2-5 rows. 9 sc (4 rows)

6 row. inc, 8 sc (10)

7-8 rows. 10 sc (2 rows)

9 row. inc, 9sc (11)

10 row. inc, 10 sc (12)

11-13 rows. 12 sc (3 rows)

We stuff the foot, leaving room for the splint fastening.

We take a 12 mm disc and a T-splint. We insert the cotter pin into the foot between the 12th and 13th rows.

14 row. Dec 6

We cut the thread, fasten it and hide it inside the part.

We knit the second foot in the same way, but we insert the cotter pin on the other side.

We take manicure scissors and make a neat haircut of the paws.

Lower paws

We knit a chain of 6 ch

1 row. from the second loop 4 sc, 3sc in 1 p, continue to knit on the other side of 3 sc, inc (12)

2 row. inc, 3 sc, 3 inc, 3 sc, 2 inc (18)

3 row. 18 sc

4 row. 3 sc, 6 dec, 3 sc (12)

5 row. 4 sc, 2 dec, 4 sc (10)

6 row. 10 sc

7 row. 4 sc, 2 inc, 4 sc (12)

8 row. 12 sc

9 row. (3 sc, inc)× 3 times (15)

10 row. 15 sc

We stuff the paw, leaving room for the splint fastening.

We take a 15 mm disc and a T-splint. We insert the cotter pin into the foot between 9 and 10 rows.

11 row. (3 sc, dec)× 3 times (12)

12 row. Dec 6

We cut the thread, fasten it and hide it inside the part.

We knit the second paw in the same way, but we insert the cotter pin on the other side.

We take nail scissors and make a neat haircut paws.

• 

Body and Assembly

1 row. 6 sc in an amigurumi ring

2 row. 6 inc (12)

3 row. (1 sc, inc) × 6 times (18)

4-6 rows. 18 sc (3 rows)

7 row. 8 sc, 2 inc, 8 sc (20)

We take a disk of 15 mm and a washer. We fasten the head to the connected part. We insert the split pin in the middle so that the marker is at the back.

8 row. 9 sc, 2 inc, 9 sc (22)

9 row. 8 sc, inc, 4 sc, inc, 8 sc (24)

10 row. 24 sc

11 row. (3 sc, inc) × 6 times (30)

We take 2 discs 12 mm and 2 washers. We fasten the upper paws on the sides of the body between the 7th and 8th rows.

12 row. (4 sc, inc) × 6 times (36)

13 row. 36 sc

14 row. (5 sc, inc) × 6 times (42)

15-16 rows. 42 sc (2 rows)

17 row. (5 sc, dec) × 6 times (36)

18 row. (4 sc, dec) × 6 times (30)

19 row. (3 sc, dec) × 6 times (24)

20 row. (2 sc, dec) × 6 times (18)

We take 2 discs 15 mm and 2 washers. We fasten the lower paws on the sides of the body between the 18th and 19th rows.

We fill the upper body with holofiber, and the stomach with granulate. Put another holofiber to make it convenient to continue knitting.

21 row. (1 sc, dec) × 6 times (12)

22 row. Dec 6

We tighten the hole, cut the thread, fasten it and hide it inside the part.

We take manicure scissors and make a neat haircut of the body. Everything!

Happy knitting!